How To Properly Clean Your Water Tank In 3 Quick And Easy Steps
If you want to properly clean your water tank, you need to know how to do it. There are several steps you can take, and they will ensure you can keep your water clean for many years. The first thing to do is remove the anode rod from the bottom of your tank. After you have removed the anode rod, you will need to sanitize the tank. This will add a solution to the water tank and let it sit for at least six hours.
Sanitize the tank
If you are going to use your RV for camping, sanitize the water tank before you use it. It is important to do so because bacteria can grow in dirty fresh water tanks. This can cause serious illnesses.
You can sanitize the water tank by using a bleach solution. The amount of bleach you use will depend on the size of your tank. For example, a 30-gallon tank needs just over half a cup of bleach. A 40-gallon tank requires one cup of bleach.Most people Hire cleaning company for this job. If you want to Hire any one then, Miss Housekeeper water tank cleaning services are the answer for the perfect solution for your dirty and clogged water tanks. The water tank cleaning service is the best way to keep your Water tank clean and to maintain its freshness.
Once you have poured the bleach mixture into your tank, make sure it sloshes around inside the tank for ten minutes. After that, you can drain the mixture and fill the tank with clean water.
When you are finished with the sanitizing process, flush the system. You should do this by running the water through all the faucets. If you find that the water is still smelling of bleach, you should refill the tank with freshwater.
To make this process easier, you can use a double bleach ratio. That means you'll only have to use a quarter cup of bleach in a gallon of water.
Remove the anode rod
Anode rods help prevent the water in your water tank from rusting. We usually make them out of aluminum or magnesium. It is important to replace anode rods regularly. A rusty smell coming from your water heater can be a sign of an anode that needs replacement. If your anode is corroding, it will not perform its role and you will get bad hot water.
The first step is to remove the drain plug. You will need to do this in order to access the anode.
After the drain plug is removed, you can then use a socket wrench to loosen the anode rod. Use a 1-1/16 inch socket. Once the anode rod is loosened, you can pull the anode out of the tank.
Next, you will need to inspect the anode rod for corrosion. You can see signs of corrosion by looking for a large chunk of metal coating on the anode rod. Also, you can look for a rotten egg smell.
If the anode rod is corroding, replace it right away. Choosing the right type of rod depends on the water quality of your home. Magnesium and aluminum rods are the most common. These are inexpensive and durable. However, magnesium rods corrode quickly in homes with hard water.
There are a few ohter things you can do to help your water tank stay in cleaned. You can have the professionals Water Tank Cleaning Services come out to your home or office and remove the anode rod for you. This is a necessary part of the water filtration process. If it is removed, the rod will no longer be able to do its job, and it will need to be replaced.
Let the solution sit for at least 6 hours
Adding a little bleach to your water tank is a great way to kill off the bacteria causing it to rust. The best part is that it's pretty cheap to do so. If you want to sanitize your RV's freshwater tank, you'll need a quart or two of household bleach. You can find it in a lot of places, like your local home improvement store.
Let the solution sit for at least six hours before draining the tank. This will give the solution a chance to do its thing. It can also help you see the effects of the solution on your own plumbing system. Aside from being a good idea for your health, allowing the solution to do its work is a great way to make the most of your hard earned money.
One perk of owning an RV is that you can take your sanitizing needs with you. This ill save you the hassle of having to stop by your local home improvement store to buy a hose and bottle of chlorine. Having a good supply of bleach on hand means that you won't have to rely on a plumber to get your water tank up and running again.
